Hoerudin Bayu Hidayah, Djoko Triyono, Rifqi Almusawi Rafsanjani, Iwan Sugihartono
In this work, LaFeO3 was synthesized via the sol-gel method and characterized to evaluate its potential for ultrafast humidity sensing applications. X-ray diffraction (XRD) confirmed the formation of a single-phase orthorhombic structure with a Pnma space group and high crystallinity. Scanning electron microscopy (FE-SEM) revealed a relatively homogeneous porous grain structure, while energy-dispersive X-ray spectroscopy (EDX) verified the presence of La, Fe, and O with stoichiometric weight percentages of 50.0%, 29.8%, and 20.2%, respectively. The sensing layer was deposited onto an interdigital transducer (IDT) with an Al2O3 (alumina) substrate, and capacitance measurements using an LCR meter at 100 Hz were performed in the 11-96% relative humidity (RH) range at room temperature. The sensor exhibited a capacitance increase from 26.93 pF (11% RH) to 603.73 pF (96% RH), with an average hysteresis value of 6.2%, response and recovery times of 9.7 s and 1.2 s, respectively, and a maximum sensitivity of 6.78 pF/%RH at 96% RH. These results indicate that LaFeO3 is a promising candidate for the development of efficient, stable, and fast-response humidity sensors for practical applications in environmental monitoring and industrial process control. © The Author(s)
Department of Physics, Faculty of Mathematics and Natural Sciences (FMIPA), Universitas Indonesia, Depok, 16424, Indonesia; Department of Physics, Faculty of Mathematics and Natural Sciences (FMIPA), Universitas Negeri Jakarta, Jakarta, 13220, Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock